-
TechFast Masonry Screw Csk/Tx
TechFast Masonry Screws, a self-tapping, no stress alternative to plastic plugs.
- Easy two step installation, drill a hole in substrate and screw in with powertool.
- Countersunk head with Torx-compatible recess.
- Impact Bit included.
- Corrosion andfire resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours.
- Complies with EU Safety, Health and Environmental requirements
-
DeWALT Tapper-Pro Blue PH Hd
- One piece self-tapping concrete screw for use in a variety of base materials including wood.
- Features a corrosion resistant Perma-Seal coating.
- Optimised thread design for lower installation torque.
- Incorporates a gimlet drill point for wood (no pre-drilling required)
- The only concrete screw to meet the 2012 IBC and IRC standards for 4 different base materials.
Applications:
- Screen enclosures.
- Exterior metal lighting.
- Storm shutters.
- Marine applications
-
D-LINE D-Fixing Fire Rated Screws
D-Fixings are fire-rated, with a 40mm long shaft and close threads which combine to provide exceptional performance.
- Ideal for securing D-Line fire-rated Safe-D ranges and other electrical installation equipment in popular substrates – including masonry, plasterboard / breeze-block, concrete, brickwork and wood.
- Extensively tested, and are certified to hold Safe-D clips and cable loads up to 970°C for 2 hours, after withstanding stress vibrations and water sprays also.
- In fire tests the D-Fixing screw threads remain securely embedded with no need for anchors or plastic wall plugs (which typically melt at 160°C).
- Fully safety tested and certified to BS5839 part 1 compliant.
- >1200ºc melting point.
- Non-corrosive finish.
- No need for plastic wall plugs.
- Excellent tensile strength, shear strength and pull-out load performance.
- 4mm pilot hole required.
- Tests confirmed that all products can hold cables secure in temperatures of 930ºC (+40 -0ºC) for 2 hours.
-
Concrete Frame Screw
Specially designed self-tapping masonry fixing.
- T30 Bit included in boxed product.
- Finish: Zinc Yellow Passivated.
- Virtually stress free, allowing close to edge applications.
- Torx compatible head screw for increased torque control.
- High load capacity with interlocking thread into base material.
- Through fixing, eliminating the need for marking and re-positioning.
- Widely used for batten, window and door frame fixing.
- Suitable for most masonry substrates including concrete and brickwork.
-
DeWALT WALL-DOG Screw Anch
- All steel, tension-free, one piece, threaded fastener.
- Head: Pan Head. Fastens various fixtures directly to drywall, wood, concrete, sand-lime, stone or brick work.
- No plugs needed.
- No pre-drilling required in wood, drywall and gypsum board.
Applications – light to medium duty applications including:
- Curtain Tracks.
- Electrical sockets and switches.
